Shutting Down Your Home's Main Water Supply: A Comprehensive Guide
Shutting Down Your Home's Main Water Supply: A Comprehensive Guide
Blog Article
We've encountered this post about How to Turn off the Water for Plumbing Repairs directly below on the web and thought it made sense to relate it with you over here.
One of the most common locations a water pipe will certainly be situated in home is in your boiler room, cellar, or a cut out panel in a section for your house.
When you find the water main you will merely transform the valve clockwise to shut all the water off in your house up until you have ended up the repair service. Some houses will certainly have a ball shutoff with a lever that you can draw rather than look to shut the water off.
If you attempt to close the water off to your fixtures by utilizing an angle stop which does not work you will certainly have to shut of the water pipe to make your repair. There are likewise several other reasons you could need to shut the water pipe like fixing frozen pipes, repairing leakages, changing components or faucets.
Many people are not conscious that they also have a water pipe shutoff right in their very own residence and just call a plumber of never wind up doing the repair work until things get really bad because they simply do not know that shutting the water pipe is actually very easy.
How to Find and Shut Off Main Water Shutoff Valve
Where is the main water shutoff valve located?
This is the million-dollar question. Your main water shutoff valve could be located in several different areas. If you have a home with a basement and crawlspace, it is probably located on an interior wall near the front of the house, where the water comes in from the water meter. In this case, it is most likely hiding in plain sight. If your home was built on a slab, the valve might be located near the hot water heater or inside your garage.
How to Turn Off Main Water Valve
Once you find the shutoff valve you will either hand turn it (clockwise for gate valves and perpendicular to the pipe for ball valves) or use the appropriate tool depending on the design.
If it is located inside your house, it will most likely be a gate or “wheel” valve that you’ll simply turn clockwise to stop the flow of water. Another way to shut off the water is to go to the water meter box. Just be careful not to mess with the city shutoff side of the meter.
Where are the isolation valves?
Isolation shutoff valves are much easier to locate. Most essential home plumbing fixtures have separate valves that control the water flow. Sinks, toilets, water heaters, and washing machines should have a small valve located near the plumbing that can easily shut off the individual water supply.
Simply turning the valve clockwise will turn off the water flow. Sink and toilet problems can be dealt with quickly by simply shutting off the supply this way. It’s always good to test the isolation valves periodically to make sure they are working properly.
Again, once your tighten the water shutoff valves and turn off the water, open up your hot and cold lines to release pressure and test if the water is indeed off.
Make it a priority to locate the water valves in your home – and keep plumbing problems from turning into costly repair situations.
https://happyhiller.com/blog/how-to-find-shut-off-main-water-shutoff-valve/
Do you appreciate more info about How to Locate & Turn Off Main Water Shut-Off Valves? Place a short review below. We will be pleased to know your insights about this write up. Hoping that you come back again in the near future. Liked our blog posting? Please share it. Help another person locate it. Kudos for your time. Visit again soon.
Plumbing SOS? Dial! Report this page